WP-TEC-1020HSL Photothermal Parallel Reactor

Basic Parameters:

Reaction Sites: 10 groups (the 11th is a blank temperature measurement point)

1# Reactor: 20ml (round bottom, small tube diameter, 100% light-transmitting quartz reaction tube)

Applicable Volume: 0.5-5mL (sealed tube), 1-10mL (room temperature, heating, lighting)

Applicable Reactions: Stirring reaction, heating reaction, reflux reaction, sealed tube reaction, anhydrous and oxygen-free reaction

Vertical Operation: Yes (vertical up-and-down operation concept)

High-Temperature Parameters:

Heating Unit: Intelligent safety heater (equipped with German IKA heater)

Temperature Control Unit: Precision intelligent probe (equipped with German IKA precision probe)

Temperature Control Technology: Internal temperature control + parallel temperature control + electronic dual temperature control

Independent Temperature Zones: 1 temperature control zone (heating module is standard)

Heating Efficiency: 5-8°C/min (10 x 5mL ethanol, 20-100°C)

Sealed Tube Experiment: Yes (scientific sealing, zero reflux sealing)

Overnight Experiment: Yes (overnight temperature ≤120°C)

Reflux Parameters: If equipped with "Condenser Reflux Module" (already configured)

Parallel Reflux: 10 sites simultaneous reflux

Reflux Coolant: Water or ethanol as coolant for photocatalytic reactions under reflux

Reflux Efficiency: ≥98%, ethanol loss rate ≤2% after 48h heating reflux at 80°C

Low-Temperature Parameters: If equipped with "Low-Temperature Module" (not configured)

Low-Temperature Experiment: Standard low temperature (does not include low-temperature circulation pump)

Cooling Method: Can be connected to an external circulation chiller

Low-Temperature Range: Down to -20°C (depending on the external circulation chiller)

Temperature Control Difference: ±1°C (depending on the external circulation chiller)

Pressure Parameters: If equipped with "Pressure Function" (not configured)

Gas Addition Experiment: Standard pressure-resistant components (enables photocatalytic reactions under low pressure)

Gas Addition Method: Gas supplied from cylinder via gas source platform through tubing

Pressure Range: Maximum gas pressure up to 10atm

Pressure Display: Adjust charging pressure range via pressure gauge at reducer outlet

Photocatalytic Parameters: Standard "Lighting Module"

Irradiation Method: Near-field bottom irradiation

Light Source Type: Monochromatic LED chips (customizable fixed wavelength, non-traditional filtering mode)

Light Source Power: 1-10W/site (adjustable power, COM-LED process, synchronous irradiation light source)

Light Source Cooling: External water or ethanol circulation cooling

Light Source Switching: Manual replacement of different wavelength light sources

Light Leakage: Minimal (total reflection, zero light pollution, high utilization)

Light Source Lifespan: 5000 hours (ensure cooling to prevent overheating, which increases light decay)

Lighting Timer: 0.1-99.9h

Photocatalytic Heating Temperature: 80°C

Monochromatic Visible Light Range: 400-700nm (ensures experimental condition consistency, refer to light source list for details)

Photochemical Reaction Channels: 10 (standard 10 white light sources)

White Light Source Description: Daylight color

Stirring Parameters: Standard "Stirring Heating"

Stirring Method: Synchronous环绕 magnetic stirring (equipped with German IKA stirring module)

Stirring Speed: 0-1500rpm (requires corresponding stirrer)

Stirring Bar: Yes (olive-shaped*L14mm*220°C)

Material Addition Parameters:

Suitable Materials and Viscosity: Low-viscosity liquids or dispersible solids

Anhydrous and Oxygen-Free Liquid Feeding: Yes (syringe puncture injection)

Anhydrous and Oxygen-Free Solid Feeding: Yes (zero-loss microsampling under nitrogen flow or weighing dish投放 under nitrogen protection)

Glove Box Feeding: Yes (entire reaction tube can be placed in glove box)

Anhydrous and Oxygen-Free Sample Collection: Yes (online minimally invasive sampling)

Puncture Sealing Septum: Yes (clean septum can be punctured repeatedly, reusable, environmentally friendly)

Secondary Sealing Function: Yes (unique septum puncture needle hole sealing ensures tube airtightness)

Schlenk Technical Parameters:

Reactor Sealing Method: Tapered hard seal (zero consumable seal)

Reaction Tube Connection: Hu-style quick connector (new design for quick installation and dual shutoff,任意 operation)

Gas Exchange Operation: Schlenk gas source platform (easy-to-use modular gas exchange platform)

Micro-Positive Pressure Schlenk Line: Yes (simulates glove box positive pressure system, equipped with high-quality gas reservoir bag)

Reaction Gas Schlenk Line: Yes (switch between inert gas and reaction gas at will)

Inert Gas Schlenk Line: Yes (switch between inert gas and reaction gas at will)

Reaction Gas Supply Method: Cylinder supply (requires own cylinder and reducer)

Inert Gas Supply Method: Cylinder or fume hood supply (requires own cylinder and reducer)

Safety-Related Parameters:

Visual Protective Cover: Yes (safety protection,抗 environmental interference)

Safety Anti-Explosion Function: Yes (safety protective cover)

Positive Pressure Tolerance: ≤4atm (maximum pressure tolerance for sealed tube reactions)

Overheat Protection: Yes (50-360°C任意 setting, automatically cuts off power if temperature exceeds set value)

Quick Hover: Yes (quickly脱离 heat source, emergency stop reaction, vertical operation concept)

Other Special Parameters:

Instrument Appearance: Silver corrosion-resistant aluminum alloy shell (aesthetic and大气, corrosion-resistant protection)

Timer Function: Yes (countdown for temperature control and stirring from 0-99h)

Weight and Volume: 22kg/D*W*H=45*35*65cm

Protection Level: IP42

Power Supply: 650W, AC220-240V, 50/60Hz

Operating Environment: Ambient temperature: 10-35°C, relative humidity: 80%

Noise Level: 70dB

Complete Accessories: Yes